Applications

Before applying DECO-FINISH, thoroughly clean floors and allow them to dry. Apply DECO-FINISH in thin, even coats with a mop or a finish applicator. Allow each coat to dry prior to applying additional coats. Maintain floors by damp mopping and buffing as needed. DECO-FINISH can be removed using conventional non-ammoniated strippers. Do not dilute DECO-FINISH. Do not return unused finish to original container. Do not use on surfaces colder than 45 degrees F. DECO-FINISH may whiten if exposed to water, but should dry back to a clean film. DECO-FINISH is not solvent resistant. DECO-FINISH is for interior use only. Since DECO-FINISH drys to a high gloss, buffing is not required. However, buffing as a regular maintenance procedure may extend the life of the floor.

One coat of DECO-FINISH will cover approximately 1000 square feet on floors that have already been sealed with DECO-SEAL.